Webnet: flexibility in planning, manufacturing and installation
Elizabeth Quay Footbridge, Perth
Arches and Curves
The bridge was conceived to maintain the well-used “around the bridges” circuit popular with cyclists and pedestrians, while accommodating the passage of ferries. There was also a desire to exploit the prominent location with a visually striking architectural feature. Reaching the required clearance for the navigation channel created a substantial change in level from Williams Quay to the western end of the bridge. That led the design team at Arup Associates to curve the bridge deck to create extended ramps at the entry points. The powerful S-curve form is complemented with arches to “reinforce the experience of movement” across a bridge deck that’s described by Arup Associates as “constantly changing in height and always curving in plan.”
Customised Mesh Solution for Balustrades
The architecture called for a transparent balustrade, but it also needed to have enough solidity to withstand wind impacts. The balustrade design follows the bridge deck curves in plan and also leans in and out vertically, twisting like a ribbon along the length of the bridge. Responding to the technical challenge, Tensile Design & Construct developed a customised version of Webnet mesh that was clear of obstruction, enhancing its capacity to conform to the support structure like a piece of fabric. The result met the design intent without compromising safety – the mesh is engineered to tolerate the highest crowd loads in the Australian National Construction Code.
The mesh was sized into eight panels, matching them to the curves on site and integrating with the balustrade. Tensile was responsible for the engineering of the balustrade and acted as consultant first before providing the final solution as a contractor. The production of the nets was done by Jakob Rope Systems. This enables an almost seamless integration of the rails and mesh enabling the sections to be joined to create two continuous pieces. With the modular strategy optimising the efficiency of the installation, the work was completed ahead of schedule.
The architects sought to achieve “simple and pure structural forms” for the Elizabeth Quay Pedestrian and Cyclist Bridge; webnet mesh was one of the products that helped them reach that goal. Tensile’s ability to respond quickly with a customised, modular version of webnet mesh to meet the specifications for the design contributed to the timely completion of the bridge for our client, contractor DASSH.
Webnet Ø 2 mm, mesh 50 mm